I
draw your attention to the advantages of our stainless steel faucets:
a) They are endless, 50 years granted (except cartridge);
b) They are completely alimentary, free of lead or cupper.
The low porosity avoid to keep impurity into the inner part of faucet;
c) They aren’t hit from atmospheric corrosion or
salt par corrosion;
d) The stainless steel taps are only polished and not
chromium-plated; all exfoliation and wear problems are avoided;
e) All productive process is ecological; we don’t
use toxic material like acids or chromium;
f) Stainless steel is easy recycling;
g) Because of the faucets are die-cast, we can realize
all models like brass ones’.
Into a second unit we produce extruded aluminium radiators.
a) Is possible to realize special dimensions (570 mm or 685 mm and so on …) that permit to efficiently use the wall;
b) we use only primary extruded aluminium (99,7%) that give an higher conductivity; Stoccarda University have certificate the thermal output with ?60° (UNI6514) , and Milan University with EN442 certificate;
c) the radiators are electro-welded and this permit to grant an higher mechanical resistance; they are tested from Milano University at 18 bar pressure;
d) each pieces are air/water tested at 6 bar into our factory;
e) we can produce radiator batteries from 2 till 24 elements without nipples (no risk of noise); at the same time is possible to combine and nipple the batteries;
f) no-oxygen in the water owing to porosity absence;
g) the radiators are easy to assembling and cleaning thank to sliding cover;
h) they are reversible;